EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technologies, it guarantees optimized Strength conversion and method steadiness for a variety of photovoltaic (PV) purposes.
Key Features with the EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technological innovation for remarkable photo voltaic Electricity harvesting. Vital options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for Increased battery life.
Liquid crystal display Display with actual-time info monitoring.
Several Load Manage Modes such as manual and timer.
Complete Electronic Protections versus overcharging, around-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all factors are involved: Tracer AN unit, temperature sensor, communication cables, and user guide.
Confirm the model number and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a nicely-ventilated, dry locale near the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Constantly adhere to proper basic safety protocols and ensure the procedure is powered off in advance of connecting components.
Action 1: Connect the battery terminals into the cost controller (optimistic to good, destructive to detrimental).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability about the controller by connecting the battery very first.
Utilize the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Guide, timer, gentle Read more Command.
5. Monitoring and Info Logging
The Tracer AN Sequence supports authentic-time checking utilizing the MT50 remote meter.
Information might be logged by using the RS485 communication port utilizing program for example Solar Station Laptop.
Remote monitoring is feasible Using the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Difficulty one: No Electric power Output
Check battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern 2: In excess of-Voltage Safety
Verify the photo voltaic array’s voltage score.
Regulate program parameters if required.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT options while in the menu.
Great things about the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technological innovation makes certain:
Bigger Effectiveness: Minimized Strength losses all through conversion.
Improved Dependability: Secure performance less than variable hundreds.
For a longer period Battery Lifestyle: Regular and precise charging profiles.
Conclusion
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification engineering is really an Extraordinary choice for optimizing solar energy era and extending battery life. By next the above setup tutorial, end users can make certain most efficiency and system longevity.